Pioneer PDR-W37 Owner's Manual - Page 34

Playing a disc with skip IDs

Page 34 highlights

6 Finalizing and Erasing TIME 4 ¢ 3 7 SKIP PLAY SKIP ID SET CLEAR COMPACT DISC RECORDER / MULTI-CD CHANGER ◊ÛB¿ˆ≤≥ 3 - COMPACT DISC MULTI CHANGER COMPACT DISC DIGITAL RECORDER OPEN/CLOSE 0 CD-R CONTROL ¶ REC VOL 6 7 PUSH ENTER CD TEXT Hi-bitLegatoLinkConversion Clearing skip IDs: 1 Use the 4 and ¢ buttons (or the jog dial) to select the track you want to clear the skip ID for. Skip play must be off (the SKIP ON indicator does not light in the display) for you to choose tracks with skip IDs. Press SKIP PLAY on the remote to turn it off. The SKIP indicator lights if the track selected is marked with a skip ID. 2 Press SKIP CLEAR. The SKIP indicator starts to blink. O2 SKIP CLR? SKIP • If the track you selected in step 2 above didn't have a skip ID set, playback jumps to the next track that does. • Use 4 and ¢ (or the jog dial) if you want to change the track again here. • If there's no room left on the disc to clear a skip ID, the display will show the message SKIP FULL. 4 Clear further skip IDs by repeating steps 1 to 3. 5 When you're finished, press 7 to stop the disc and press 0 (CD-R side). Until you eject the disc, the recorder stores the skip ID information in its memory. On pressing 0, the recorder writes the skip ID information onto the disc. Be careful: don't switch off the unit before ejecting the disc-you'll lose this sessions skip ID changes! Playing a disc with skip IDs If you're not sure whether a disc has skip IDs programmed, look for the SKIP ON indicator in the display when you load a disc-it will light automatically if one or more are present. 1 Load a disc. The SKIP ON indicator lights up if there are any skip IDs on the disc. This means the player won't play those tracks that are marked by skip IDs. 3 Press SKIP CLEAR again to clear the skip ID for the track playing. The SKIP indicator disappears once the skip ID has been cleared. • To cancel, press 6 (or SKIP SET). 2 Press SKIP PLAY to switch skip play on/off, then press 3 (6 on the front panel). When you turn off skip play, the player ignores the skip IDs and plays all tracks on the disc. • If there were no skip IDs on the disc in the first place, the SKIP PLAY button has no effect. 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

34
6 Finalizing and Erasing
Clearing skip IDs:
1
Use the
4
and
¢
buttons (or the
jog dial) to select
the track you want
to clear the skip ID for.
Skip play must be off (the
SKIP
ON
indicator does not light
in the display) for you to choose tracks with skip IDs. Press
SKIP
PLAY
on the remote to turn it off.
The
SKIP
indicator
lights if the track selected is marked with a skip ID.
2
Press SKIP CLEAR.
The
SKIP
indicator starts to blink.
O2
SKIP
CLR?
SKIP
If the track you selected in step 2 above didn’t have a skip ID
set, playback jumps to the next track that does.
• Use
4
and
¢
(or the jog dial) if you want to change
the track again here.
If there's no room left on the disc to clear a skip ID, the
display will show the message
SKIP
FULL
.
3
Press SKIP CLEAR again to clear the
skip ID for the track playing.
The
SKIP
indicator disappears once the skip ID has been
cleared.
To cancel, press
6
(or
SKIP
SET
).
3
- COMPACT DISC MULTI CHANGER
COMPACT DISC DIGITAL RECORDER
COMPACT DISC RECORDER / MULTI-CD CHANGER
Hi-bit Legato Link Conversion
CD TEXT
◊ÛB¿ˆ≤≥
CD-R CONTROL
OPEN/CLOSE
6
7
0
REC VOL
PUSH ENTER
4
Clear further skip IDs by repeating
steps 1 to 3.
5
When you're finished, press
7
to stop
the disc and press
0
(CD-R side).
Until you eject the disc, the recorder stores the skip ID
information in its memory. On pressing
0
, the recorder
writes the skip ID information onto the disc.
Be careful:
don’t switch off the unit before ejecting the
disc—you’ll lose this sessions skip ID changes!
TIME
SET
CLEAR
7
3
4
¢
SKIP PLAY
SKIP ID
Playing a disc with skip IDs
If you're not sure whether a disc has skip IDs programmed, look for
the
SKIP
ON
indicator in the display when you load a disc—it
will light automatically if one or more are present.
1
Load a disc.
The
SKIP
ON
indicator lights up if there are any skip IDs
on the disc. This means the player won't play those tracks
that are marked by skip IDs.
2
Press SKIP PLAY to switch skip play
on/off, then press
3
(
6
on the
front panel).
When you turn off skip play, the player ignores the skip IDs
and plays all tracks on the disc.
If there were no skip IDs on the disc in the first place, the
SKIP
PLAY
button has no effect.