Pioneer PDR-W839 Owner's Manual - Page 7

About CD, CD-R and CD-RW Discs - problems

Page 7 highlights

Avoiding condensation problems Condensation may form inside the player if it is brought into a warm room from outside, or if the temperature of the room rises quickly. Although the condensation won't damage the player, it may temporarily impair its performance. For this reason you should leave it to adjust to the warmer temperature for about an hour before switching on and using. Maintaining your CD recorder To clean the compact disc recorder, wipe with a soft, dry cloth. For stubborn dirt, wet a soft cloth with a mild detergent solution made by diluting one part detergent to 5 or 6 parts water, wring well, then wipe off the dirt. Use a dry cloth to wipe the surface dry. Do not use volatile liquids such as benzene and thinner which may damage the surfaces. Moving the unit Before moving this unit, remove all discs, then close the tray. The CD SELECT lights should all turn off. At this point, hold down the 7 button (CD-R side) and press PLAY MODE on the front panel. When you see the message OK! you can then switch the unit off and unplug from the wall outlet. This procedure returns the unit to its shipping position. You cannot use the unit when the display reads OK! - normal operation resumes when power is switched back on. Never lift or move the unit during playback or recording -discs rotate at a high speed and may be damaged. CD lens cleaner The compact disc recorder's pickup lens should not become dirty in normal use, but if for some reason it should malfunction due to dirt or dust, consult your nearest Pioneer authorized service center. Although lens cleaners for compact disc recorders are commercially available, we do not recommend using them since some may damage the lens. Power cord caution Handle the power cord by the plug part. Do not pull out the plug by tugging the cord, and never touch the power cord when your hands are wet, as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, or other object on the power cord or pinch the cord in any other way. Never make a knot in the cord or tie it with other cords. The power cords should be routed so that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electric shock. Check the power cord once in a while. If you find it damaged, ask your nearest Pioneer authorized service center or your dealer for a replacement. 1 Before You Start About CD, CD-R and CD-RW Discs This unit is compatible with three different types of compact disc: Playback-only CDs This unit will playback any ordinary audio CDs carrying the Compact Disc Digital Audio mark shown right. CD-Recordable discs Recordable CDs, or CD-R, carry the mark shown right, and are 'write once'. This means that once something is recorded on the disc it is permanent -it can't be re-recorded or erased. CD-Rewritable discs Rewritable CDs, or CD-RW, carry the mark shown right. As the name indicates, you can erase and rerecord material on these discs so that they can be used over and over again. Consumer-use discs This recorder is only compatible with special consumer-use CD-R and CD-RW discs. These are clearly marked For Music Use Only, For Consumer, or For Consumer Use. Other types of CD-R or CD-RW discs, such as those available for computerbased CD recorders, will not work with this recorder. Pioneer has checked the following branded discs for compatibility with this recorder (as of May 2000): • Eastman Kodak Company • FUJI PHOTO FILM CO., LTD. • Hitachi Maxell, Ltd. • MITSUI CHEMICALS, INC. • TAIYO YUDEN CO., LTD. • TDK CORPORATION • VERBATIM CORPORATION • PIONEER CORPORATION • SONY CORPORATION • RITEK CORPORATION Sample discs from the following makers have also been checked for compatibility (as of May 2000), although at the time of writing discs branded under these names are not available. • Mitsubishi Chemical Corporation • RICOH COMPANY, LTD. Note: Discs from any of the above makers may also be sold under different brand names. 7 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

7
1 Before You Start
En
Maintaining your CD recorder
To clean the compact disc recorder, wipe with a soft, dry cloth. For
stubborn dirt, wet a soft cloth with a mild detergent solution made
by diluting one part detergent to 5 or 6 parts water, wring well, then
wipe off the dirt. Use a dry cloth to wipe the surface dry. Do not use
volatile liquids such as benzene and thinner which may damage
the surfaces.
Moving the unit
Before moving this unit, remove all discs, then close the tray. The
CD
SELECT
lights should all turn off. At this point, hold down the
7
button (CD-R side) and press
PLAY
MODE
on the front panel.
When you see the message
OK
!
you can then switch the unit off
and unplug from the wall outlet. This procedure returns the unit to
its shipping position. You cannot use the unit when the display
reads
OK
!
— normal operation resumes when power is switched
back on.
Never lift or move the unit during playback or recording—discs
rotate at a high speed and may be damaged.
CD lens cleaner
The compact disc recorder's pickup lens should not become dirty in
normal use, but if for some reason it should malfunction due to
dirt or dust, consult your nearest Pioneer authorized service center.
Although lens cleaners for compact disc recorders are commercially
available, we do not recommend using them since some may
damage the lens.
Power cord caution
Handle the power cord by the plug part. Do not pull out the plug by
tugging the cord, and never touch the power cord when your hands
are wet, as this could cause a short circuit or electric shock. Do not
place the unit, a piece of furniture, or other object on the power
cord or pinch the cord in any other way. Never make a knot in the
cord or tie it with other cords. The power cords should be routed so
that they are not likely to be stepped on. A damaged power cord can
cause a fire or give you an electric shock. Check the power cord
once in a while. If you find it damaged, ask your nearest Pioneer
authorized service center or your dealer for a replacement.
About CD, CD–R and CD–RW Discs
This unit is compatible with three different types of compact disc:
Playback-only CDs
This unit will playback any ordinary audio CDs
carrying the Compact Disc Digital Audio mark
shown right.
CD-Recordable discs
Recordable CDs, or CD-R, carry the mark shown
right, and are 'write once'. This means that once
something is recorded on the disc it is perma-
nent—it can't be re-recorded or erased.
CD-Rewritable discs
Rewritable CDs, or CD-RW, carry the mark shown
right. As the name indicates, you can erase and re-
record material on these discs so that they can be
used over and over again.
Consumer-use discs
This recorder is only compatible with special consumer-use CD-R
and CD-RW discs. These are clearly marked
For Music Use
Only
,
For Consumer
, or
For Consumer Use
. Other types
of CD-R or CD-RW discs, such as those available for computer-
based CD recorders, will not work with this recorder.
Pioneer has checked the following branded discs for compatibility
with this recorder (as of May 2000):
Eastman Kodak Company
FUJI PHOTO FILM CO., LTD.
Hitachi Maxell, Ltd.
MITSUI CHEMICALS, INC.
TAIYO YUDEN CO., LTD.
TDK CORPORATION
VERBATIM CORPORATION
PIONEER CORPORATION
SONY CORPORATION
RITEK CORPORATION
Sample discs from the following makers have also been checked for
compatibility (as of May 2000), although at the time of writing
discs branded under these names are not available.
Mitsubishi Chemical Corporation
RICOH COMPANY, LTD.
Note:
Discs from any of the above makers may also be sold under
different brand names.
Avoiding condensation problems
Condensation may form inside the player if it is brought into a
warm room from outside, or if the temperature of the room rises
quickly. Although the condensation won’t damage the player, it
may temporarily impair its performance. For this reason you
should leave it to adjust to the warmer temperature for about an
hour before switching on and using.