Pioneer VSX 517-K Owner's Manual - Page 7

5 minute guide 02 English Deutsch Français Italiano Nederlands Español Using the Quick Setup You can use the Quick Setup to get your system up and running with just a few button presses. The receiver automatically makes the necessary settings after you have selected your speaker setup, room size and listening position. If you want to make more specific settings, refer to The System Setup menu on page 28. Use the front panel controls for the steps below. PHASE CONTROL PHASE DIALOGUE AUTO SURR/ CONTROL ENHANCEMENT DIRECT DVD / LD DVD 5.1 TV / SAT DVR / VCR STANDBY/ON PHONES SOUND MIDNIGHT/ VSB RETRIEVER LOUDNESS MODE TONE SIGNAL SELECT DIMMER TUNER EDIT QUICK SETUP SETUP RETURN MULTI JOG ENTER VSX-517 MULTI JOG TUNING STATION STEREO/ ADVANCED F.S.SURR STANDARD SURROUND LISTENING MODE MASTER VOLUME DOWN UP 1 If the receiver is off, press  STANDBY/ON to turn the power on. 2 Press QUICK SETUP. 3 Use the MULTI JOG dial to choose your subwoofer setting. Select YES or NO, depending on whether you've connected a subwoofer. 4 Press ENTER. 5 Use the MULTI JOG dial to choose your speaker setup. If you selected YES for the subwoofer setting in step 3, the following choices are available: 2.1ch - 3.1ch - 4.1ch - 5.1ch If you selected NO for the subwoofer setting in step 3, the following choices are available: 2.0ch - 3.0ch - 4.0ch - 5.0ch • Check the table below to find the speaker setup that corresponds with your system. 6 Press ENTER. 7 Use the MULTI JOG dial to choose your room size. Depending on the distance of your speakers from the listening position, choose between small, medium, or large (S, M or L), M being an average-sized room. 8 Press ENTER. 9 Use the MULTI JOG dial to choose your listening position. You can cycle between the following choices: • FWD - If you are nearer to the front speakers than the surround speakers • MID - If you are equal distance from the front and surround speakers • BACK - If you are nearer to the surround speakers than the front speakers 10 Press ENTER to confirm your setup. The display shows the speaker setup, room size and listening position that you have selected. 7 En