Pioneer VSX-90TXV Owner's Manual - Page 24

04 Controls and displays Display 1 2 3 4 5 6 7 8 9 10 11 AUTO L C R 2DIGITAL DTS WMA9 Pro SL S SR SBL SB SBR DIGITAL ANALOG LFE STREAM DIRECT 2PRO LOGIC Neo :6 THX ADV.SURROUND STEREO STANDARD SP AB SLEEP FULL BAND PHASE CONTROL TUNED RDS MULTI-ZONE DIALOG E ATT OVER STEREO EON S.RTRV SOUND V.SB MONO DVR 14 15 16 17 18 19 12 13 dB SR+ 1 SIGNAL indicators Light to indicate the currently selected input signal. AUTO lights when the receiver is set to select the input signal automatically (page 30). 2 Program format indicators These change according to which channels are active in digital sources. L - Left front channel C - Center channel R - Right front channel SL - Left surround channel S - Surround channel (mono) SR - Right surround channel SBL - Left surround back channel SB - Surround back channel (mono) SBR - Right surround back channel LFE - Low frequency effects channel 3 Digital format indicators Light when a signal encoded in the corresponding format is detected. 4 S.RTRV Lights when the Sound Retriever is switched on (page 32). 5 MULTI-ZONE Lights when the MULTI-ZONE feature is active (page 50). 6 PHASE CONTROL Lights when the Phase Control is switched on (page 10). 7 OVER / ATT OVER lights to indicate that the level of an analog source is too high. ATT lights when you use the attenuator (ANALOG ATT) to reduce it. 8 V.SB Lights during Virtual surround back processing (page 31). 9 TUNER indicators TUNED - Lights when a broadcast is being received. STEREO - Lights when a stereo FM broadcast is being received in auto stereo mode. MONO - Lights when the mono mode is set using the MPX button. 10 DIALOG E Lights when the Dialog Enhancement feature is switched on (page 32). 11 SOUND Lights when any of the Midnight, Loudness or tone controls feature is selected (page 32). 12 Master volume level 13 SR+ Lights when the SR+ mode is switched on (page 54). 14 STREAM DIRECT Lights when the Stream Direct mode is selected (page 30). 15 Speaker indicators Indicate the current speaker system, A and/or B (page 48). 16 Listening mode indicators THX - Lights when a Home THX mode is selected. ADV.SURROUND - Lights when an Advanced Surround mode has been selected (page 28). STEREO - Lights when the stereo mode is selected (page 29). STANDARD - Lights when a Standard Surround mode is switched on (see Listening in surround sound on page 27). 17 SLEEP Lights when the receiver is in sleep mode (page 59). 18 Matrix decoding format indicators 2PRO LOGIC IIx - This lights to indicate 2 Pro Logic II / 2 Pro Logic IIx decoding (page 27). Neo:6 - When one of the Neo:6 modes of the receiver is on, this lights to indicate Neo:6 processing (page 27). 19 Character display Displays various system information. 24 En