Pioneer VSX-90TXV Owner's Manual - Page 58

09 Other Settings 1 Select 'Video Conv. Setup' from the Other Setup menu. 6.Other Setup a.DRC Setup b.Dual Mono Setup c.LFE ATT Setup d.SR+ Setup e.Video Conv. Setup f. Multi Zone Setup g.12V Trigger Setup :Return 6e. Video Converter Setup Video Conv. ON :Finish 2 Choose the setting that you want. • ON - All analog video signals are output from the MONITOR VIDEO OUT jacks. • OFF - No conversion between video formats. 3 When you're finished, press RETURN. You return to the Other Setup menu. Multi Zone Setup • Default setting: Variable If you've made MULTI-ZONE connections (see MULTIZONE listening on page 50) you may need to specify your volume setting. 1 Select 'Multi Zone Setup' from the Other Setup menu. 6. Other Setup a.DRC Setup b.Dual Mono Setup c.LFE ATT Setup d.SR+ Setup e.Video Conv. Setup f. Multi Zone Setup g.12V Trigger Setup :Return 6f. Multi Zone Setup Volume Level Variable Be careful of loud volume when "FIXED" is selected. :Finish 2 Select the volume level setting. • Variable - Use this setting if you've connected a power amplifier in the sub zone (this receiver is simply being used as a pre-amp) and you will be using this receiver's controls to adjust the volume.1 • Fixed - Use this setting if you've connected a fully integrated amplifier (such as another Pioneer VSX receiver) in the sub zone and want to use that receiver's volume controls (this setting is not available if the surround back system setting is set to ZONE2). With the Fixed setting, the source is sent from this receiver at maximum volume, so make sure the volume is quite low in the sub zone at first and then experiment to find the correct level. 3 When you're finished, press RETURN. You return to the Other Setup menu. 12 Volt Trigger setup • Default setting: OFF (all components) After connecting a component the 12 volt trigger (see Switching components on and off using the 12 volt trigger on page 52), it switches on automatically when you select an input function set to switch the trigger on. Specify which input functions switch on the trigger below. 1 Select '12V Trigger Setup' from the Other Setup menu. 6. Other Setup a.DRC Setup b.Dual Mono Setup c.LFE ATT Setup d.SR+ Setup e.Video Conv. Setup f. Multi Zone Setup g.12V Trigger Setup :Return 6g. 12V Trigger Setup DVD / LD TV / SAT DVR1 DVR2 VIDEO TUNER CD-R CD XM RADIO ( Next) OFF [ OFF ] [ OFF ] [ OFF ] [ OFF ] [ OFF ] [ OFF ] [ OFF ] [ OFF ] :Finish 2 Select an input function and choose the setting that you want. This should be the input function, that when selected, switches on the 12 volt trigger. 6g. 12V Trigger Setup DVD / LD TV / SAT DVR1 DVR2 VIDEO TUNER CD-R CD XM RADIO ( Next) ON [ OFF ] [ OFF ] [ OFF ] [ OFF ] [ OFF ] [ OFF ] [ OFF ] [ OFF ] :Finish • OFF - 12 volt trigger is not activated for the selected component. • ON - 12 volt trigger is activated for the selected component. 3 Repeat for as many input functions as you would like to set. 4 When you're finished, press RETURN. You return to the Other Setup menu. Note 1 If you selected ZONE2 in the Surround back speaker setting on page 35, you won't be able to change the volume level. 58 En