Pioneer VSX-LX305 Elite 9.2-Channel Network AV Receiver Instruction Manual Eng - Page 132
Miscellaneous, Tuner, Remote ID
View all Pioneer VSX-LX305 Elite 9.2-Channel Network AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Miscellaneous Tuner Change the settings for Tuner. AM/FM Frequency Step (North American models) (Default Value: 10 kHz / 0.2 MHz) Select a frequency step to suit your residential area. Select "10 kHz/0.2 MHz" or "9 kHz/0.05 MHz". • When this setting is changed, all radio presets are deleted. AM Frequency Step (Australian and Asian models) (Default Value: 9 kHz) Select a frequency step to suit your residential area. Select "10 kHz" or "9 kHz". • When this setting is changed, all radio presets are deleted. FM Search Level (European models) (Default Value: Normal) If automatic tuning regularly stops on FM stations with weak reception when "Normal" is selected, select "Strong" so only those FM stations with strong reception are selected. DAB Auto Scan (European models) (Default Value: -) You can run the auto scan when new DAB stations are added or when you move house. DAB DRC (European models) (Default Value: Off) With the DRC (Dynamic Range Control) setting, you can reduce the dynamic range of DAB digital radio so that you can still hear quiet parts even when listening at low volume levels - ideal for listening to the radio late at night when you don't want to disturb anyone. Off Large Small DRC off Large reduction in dynamic range Small reduction in dynamic range Setup Remote ID Change the remote controller ID. Remote ID (Default Value: 1) Select an ID for the unit's remote controller from "1", "2", and "3" to prevent interference between the unit and other Pioneer components that are installed in the same room. After changing the ID on the main unit, change the ID on the remote controller accordingly with the following procedure. While pressing and holding the MODE button, press the following buttons for approx. 3 seconds. • To change the remote controller ID to "1": AUTO/DIRECT • To change the remote controller ID to "2": SURR • To change the remote controller ID to "3": STEREO 132