Pioneer VSX-LX305 Elite 9.2-Channel Network AV Receiver Instruction Manual Eng - Page 93
Playing Back (ZONE 3), To set the function to off
View all Pioneer VSX-LX305 Elite 9.2-Channel Network AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Playing Back (ZONE 3) 2 1 Playback In the remote controller operation, while pressing and holding the ZONE 3 SHIFT button on the remote controller, operate with each button. Settings are required to playback a source in ZONE 3. Set "Speaker" - "Configuration" - "Zone Speaker" ( →p115) in the System Setup menu to "Zone 2/Zone 3". 1. Point the remote controller at the unit, and while pressing and holding the ZONE 3 SHIFT button on the remote controller, press . • "Z3" on the display of the main unit lights up. 2. While pressing and holding the ZONE 3 SHIFT button on the remote controller, press the input selector of the input source you want to play in the separate room. When operating on the main unit, press the ZONE CONTROL button repeatedly to select "Z3" on the display, then within 8 seconds select the input you want to play in another room using the input selector dial. 3. To adjust the volume of the ZONE speakers in the separate room, press the volume buttons while pressing the ZONE 3 SHIFT button on the remote controller. When operating on the main unit, press the ZONE CONTROL button repeatedly to select "Z3" on the display, then within 8 seconds adjust using the MASTER VOLUME knob. • If you turn the unit to standby during multi-zone playback, the Z3 indicator is dimmed, and the playback mode is switched to playback in a separate room only. Setting ZONE 3 to on while the unit is in standby also switches the playback mode to playback in a separate room only. • For ZONE 3 output, audio from externally connected AV components can be output only when it is an analog audio signal. • DSD audio signals cannot be output to ZONE 3 when selected with the "NET" or "USB" input selector. • If ZONE 3 is on, power consumption during standby will increase. • This function turns off if you use the Bluetooth Transmitter ( →p64). To set the function to off: While pressing and holding ZONE 3 SHIFT button, press . Alternatively, press the ZONE 3 ON/OFF button on the main unit. 93