Polaroid EX53U User Manual - Page 13
Projector + Computer
UPC - 082400027092
View all Polaroid EX53U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENGLISH Basic connections (continued) Projector + Computer For computer with Mini D-SUB or DVI-D DVI-D cable for PC RGB cable for PC COMPUTER-IN DVI-D (HDCP) to monitor port Computer to DVI-D port MONITOR OUT AUDIO-IN AUDIO-OUT Audio cable (option) AUDIO OUT MONITOR OUTPUT DVI-D Necessary when outputting to both a PC monitor and the projector. RGB cable for PC (option) PC audio cable (option) to PC audio output For analog connection: 1. Connect one end of the supplied RGB cable to the COMPUTER-IN terminal (1, 2) of the projector. 2. Connect the other end of the RGB cable to the monitor port of the computer. For digital connection: 1. Connect one end of the DVI-D cable to the DVI-D (HDCP) terminal of the projector. 2. Connect the other end of the DVI-D cable to the monitor port of the computer. • If you start the computer first, images may not be displayed. • The DVI-D (HDCP) terminal of this projector supports DDC2B. If the projector is connected to a computer which supports the standard, the com- puter automatically reads out the information about the projector to output appropriate images. • If the projector is connected to a computer which supports DDC, plug the power plug of the projector into the wall outlet, and then start the com- puter. • The DVI type that the projector supports is DVI-D (digital). DVI-A (analog) cannot be used with the projector. • If a computer has a DVI-I (digital and analog) output connector, you can connect the projector with a DVI-D cable. • Use the AUDIO-IN terminal for the audio input. For monitor connection: Connect the RGB cable from the monitor to the MONITOR OUT terminal of the projector. • Images may not be displayed correctly depending on the type of the input signal. See the instruction manual of the monitor. • Signals are coming from the COMPUTER-IN terminal (1 or 2) of the projector. • When signals are coming from both COMPUTER-IN terminals (1, 2), images are projected from the terminal (1 or 2) currently or last selected in the projector's menu. Important: • When you use a longer RGB cable instead of the provided cable, the image may not be projected correctly. • Some computers require additional connectors or analog RGB output adapters to be connected with this projector. Contact your dealer for fur- ther information. • This projector uses stereo pin jack for its audio input. Check the type of the audio output terminal of the connected computer and prepare a proper cable for connection. Some computers don't have the audio output terminal. • Speaker output is mono. • When the audio cable is connected to the AUDIO-OUT terminal, the speaker output is muted. • While the DVI-D terminal is being used or while an image is being projected wirelessly, you cannot use the MONITOR OUT terminal. For Macintosh • If your Macintosh has no video port, a monitor output adapter is required. Contact your dealer for further information. • Some Macintoshes require a MAC adapter for the RGB cable for connection with this projector. Contact your dealer for further information. About DDC The COMPUTER/COMPONENT VIDEO IN-1 terminal of this projector complies with the DDC 1/2B standard. When a computer supporting this standard is connected to this terminal, the computer will automatically load the information from this projector and prepare for output of appropriate images. • After connecting a computer supporting this standard to this terminal, plug the power cord of the projector in the wall outlet first, and then boot up the computer. EN-13