Polaroid EX53U User Manual - Page 34

Menu operation (continued) 3. FEATURE menu Menu option Setting AUTO ASPECT 16:9 PASSWORD FUCNTION MENU POSITION CINEMA MODE FULL 2 options AUTO/OFF VIDEO SIGNAL WXGA SETUP 8 options OFF/AUTO/1280 x 768/ 1280 x 768RB/ 1360 x 768/ 1366 x 768 AUTO OFF 3.75%/7.5% SCART INPUT LANGUAGE RESET ALL ON/OFF 12 languages OK Feature description Automatically sets the aspect ratio in relative to the input signal. Use this setting for most cases. Selects a desired screen position for anamorphically squeezed or horizontally compressed images stored on DVD disks. You can select from CENTER, UPPER, and LOWER by pressing the ENTER button. Select this setting when you want to project images in the full screen. Use this setting to activate or deactivate the password lock. Use this setting to change the position of the menu on the screen. Select Auto to automatically activate the film mode when the input video signal is a video signal from a film. Select Auto to automatically set the appropriate video format in relative to the input signal. If projected images aren't displayed correctly, select a desired video format manually. Select the appropriate format when the input signal is a WXGA video signal. Select this setting to automatically change the SETUP mode. Select this setting to increase the density of black. Use this setting when images are dark. Select this setting to lower the density of black. • When 7.5% is set, the brightness is decreased by the setup can- cel function for the U.S. Select ON when you connect the projector to a device equipped with a SCART terminal that can output RGB signals. The SCART terminal is used mainly in Europe. Select OFF for most cases. This mode can be set only when the input signal is from the COMPUTER/COMPONENT VIDEO IN-1 terminal. Selects a desired language for the menu. Resets all menu settings except for IMAGE CAPTURE, PASSWORD FUNCTION, and LANGUAGE to the default. opt. FEATURE ASPECT PASSWORD FUNCTION MENU POSITION CINEMA MODE ? VIDEO SIGNAL WXGA WXGA SETUP SCART INPUT A è LANGUAGE RESET ALL AUTO DISPLAY INPUT 1. AUTO AUTO OFF AUTO OFF English OK • You can select CINEMA MODE only when the input signal is a TV60, TV50, 480i, or 576i video signal. • When SCART INPUT is set to ON, nothing is output to the external monitor. No computer signals are projected, either. • Use a SCART-Mini D-SUB 15-pin cable (optional) when you connect the projector with an AV device equipped with the SCART terminal. Note that you cannot use some AV devices equipped with the SCART terminal to connect with this projector. EN-34