Polaroid EX53U User Manual - Page 27
How to use the administration screen continued
UPC - 082400027092
View all Polaroid EX53U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
ENGLISH How to use the administration screen (continued) Changing the network settings • For the setting items, ask your network administrator. 1. Click "Network Setup". 2. Change the settings, then click the [Apply] button. • You can change the following settings. Settings Contents IP Setup • If the projector is connected to a DHCP network, select "Obtain an IP address automatically". • If the projector is used with a static IP, select "Use the following IP address:", and then specify the values for "IP Address", "Subnet Mask", and "Default Gateway". • You cannot specify prohibited IP addresses such as 0.0.0.0 and 255.255.255.255. DHCP Server Setup • If the projector is connected to computers, it functions as a server and can assign IP addresses to the computers. If you want the projector to assign IP addresses, select "Auto". • If you select "Auto", select "Obtain an IP address automatically" for the TCP/IP settings in the computer. • The range in which the IP addresses are assigned is displayed in "Start IP" and "End IP". These IP addresses are changed automatically if the IP address of the projector is changed. Wireless Setup • You can choose "Enable" or "Disable" for "Wireless LAN". If you selected "Disable" for "Wireless LAN", you can enable it again by connecting using Wired LAN or performing NETWORK RESET in the WIRELESS menu of the projector. • You can specify a value of 14 digits that follow "Wireless Projector" as a SSID. • If you enable "SSID Broadcast", you can search "Wireless Projector" automatically. Also, you can disable "SSID Broadcast" for security improvement. If you selected "Disable" for "SSID Broadcast", you can enable it again by connecting using Wired LAN or performing NETWORK RESET in the WIRELESS menu of the projector. Channel • The model for North America has 11 channels, and that for Europe has 13 channels. If you select "Auto", you can select a channel, which is in an optimum radio wave environment, from the above channels. • If the radio wave environment is poor during use, switch to another channel manually. WEP • You can improve security for the wireless communication by encrypting it between the projector and computers. • If you use the WEP function, select 128-bit (ASCII: 13 characters), 64-bit (ASCII: 5 characters), 128-bit (Hex: 26 digits), or 64bit (Hex: 10 digits). Specify a key according to the number of the characters/digits. • You are required to enter the above specified key when connecting the projector wirelessly. Enter the specified key. • When using multiple units of the wireless projector, do not overlap the settings for "SSID" in "Wireless Setup". 3. Check the displayed settings, then click the [OK] button. 4. Reboot the system. • The specified settings can be applied. • It takes approximately one minute to reboot the system. EN-27