Polaroid EX53U User Manual - Page 21
Projecting images wirelessly
UPC - 082400027092
View all Polaroid EX53U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
ENGLISH Projecting images wirelessly This section describes the procedure for projecting images on computer screens using the wireless connection (wireless LAN). • This data projector supports IEEE802.11b/g. • When you use the wireless connection, the MONITOR OUT termi- nal, AUDIO-IN terminal, and AUDIO-OUT terminal cannot be used. • When you use the wireless connection and wired LAN connection, audio is not output. A. Connecting the antenna Preparation • Make sure that the projector and the computer are turned off. • If you switch the input source to WIRELESS, the starting screen appears, and then the following screen appears. ԙ Ԙ 1. Connect the supplied antenna to the antenna terminal. 2. Stand the antenna up. • Connect the antenna firmly so that it cannot be removed. B. Plugging the power code See "Preparation for projection" on page 14. C. Turning the power on and adjusting the focus Preparation • Remove the lens cap. Turning on the projector See "Basic operation" on page 15. Adjust the focus See "Basic operation" on page 15. D. Switching the input source 1. Press the WIRELESS button on the remote control or the COMPUTER button on the control panel. ON button ON MAGNIFY STANDBY ASPECT VOLUME UP, DOWN buttons UP VOL PAGE KEYSTONE DOWN MENU AUTO POSITION WIRELESS button AV MUTE ENTER FREEZE VIEWER UNPLUG 1 COMPUTER 2 VIDEO S-VIDEO WIRELESS DVI Direction buttons • Each time you press the COMPUTER button on the control panel, the input source is switched in the order of "COMPUTER 1" → "COMPUTER 2" → "DVI" → "WIRELESS". • When the screen flickers, press the W or X button on the remote control to reduce the flicker. E. Connecting wirelessly • Be sure to specify the settings as a user with Administrator rights. • Log on to the computer as a user with Administrator rights in advance, and then check if the wireless connection is available. (For more details, see the manual of your computer.) 1. Turn the computer on. 2. Click the Start button, then select "Control Panel". 3. Click "Network and Internet Connections". 4. Click "Network Connections". 5. Right-click "Wireless Network Connection" to select "View Avail- able Wireless Networks". • If the wireless connection is set to "Disable", right-click "Wireless Network Connection" to select "Enable". 6. Select "Wireless Projector ***", then click the [Connect] button. • If the projector is wirelessly connected to the computer successfully, "Connected" appears. • The connection takes approximately one minute. • If your computer and the projector are already connected wirelessly, close the window. • If the projector and computer cannot be connected wire- lessly, see page 44. • You can change the character string subsequent to "Wireless Projector" in the administration screen. EN-21