Polaroid EX53U User Manual - Page 44
The projector cannot be connected wirelessly., Others
UPC - 082400027092
View all Polaroid EX53U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Troubleshooting (continued) The projector cannot be connected wirelessly. Problem Solution • The wireless function of your computer is not avail- able. • • The wireless connection icon of your computer is • not displayed. • • "Wireless Projector" is not displayed in "View Available Wireless Networks". • • The message "No any wireless card can be used" • appears. Some computers are equipped with a wireless power switch. Turn the switch ON. Select and right-click the "Wireless Network Connection" icon. If the properties are disabled, select "Enable". Some computers allow you to select Disable/Enable for the wireless function using BIOS. For more details, see the manual of your computer. Perform NETWORK RESET in the WIRELESS menu of the projector. Set POWER MODE of the projector to ON. The message "No Projector Found" or "Network is not available" appears. • Display the "Wireless Network Connection" properties of your computer, and then check that "Obtain an IP address automatically" and "Obtain DNS server address automatically" are selected in the "Internet Protocol (TCP/IP)" properties. • If you changed the network setup settings in the system administrator screen for the Web, change the properties of "Wireless Network Connection" in your computer according to the changed settings. • Perform NETWORK RESET in the WIRELESS menu of the projector. • Set POWER MODE of the projector to ON. The message "Due to your network or firewall set- ting, the client application cannot connect to the pro- jection server. Please check related settings to allow • Open the "Windows Firewall" dialog box from "Control Panel" of your computer, and then check that the "Wireless Projector" check box is selected in the "Programs and Services" list in the [Exceptions] tab. this application to be able to communicate with the server!" appears. • Switch the input source of the projector to "WIRELESS". The SSID name of this projector is not displayed for • • Set POWER MODE to ON or AUTO in the menu for the wireless function of the projector. If the reception status is poor, move the projector closer to the computer, or make sure that no obstacle exists the available access point. between the projector and the computer. • Enable the SSID broadcast in the network setup. • You cannot log on the screen. • The Web screen "Wireless Projector" is not dis- played. • The IP of the wireless projector is displayed as 0.0.0.0 in the login screen. • Depending on the security software, a function to prevent access to Phishing sites is provided. Disable the function while using the projector. • Confirm that the Server IP of the projector is different from the IP address of your computer. • Make sure that the first three digits of the Server IP of the projector are the same as those of the IP address of your computer. (Example: the Server IP of the projector: 192.168.100.10; the IP address of your computer: 192.168.100.15) • Make sure that the correct Web address is entered. (Make sure that "www" is not included in the address.) • If the above screen is not displayed, select and right-click the "Wireless Network Connection" icon of your computer to display the properties, select "Internet Protocol (TCP/IP)", and then check that "Obtain an IP address automatically" and "Obtain DNS server address automatically" are selected in the properties. • Perform NETWORK RESET in the WIRELESS menu of the projector. • Set POWER MODE of the projector to ON. • If your computer is set to a static IP or is used in a DHCP environment, enter the Server IP displayed in the The Web page "Wireless Projector" is not displayed default screen of the wireless connection. even if you run the Web browser. • Select the [Tools] menu → [Internet Options] → [Security] → [Custom Level] to set [Allow META REFRESH] to [Enable]. You cannot install the connection software. • Log on as a user with administrator rights. The projector cannot be connected wirelessly. • Check if any network bridge is used. Others Problem The exhaust vents emit warm air. No audio is output. The menu can't be used. "TEMPERATURE!!" is displayed. The mark appears. The remote control doesn't function easily or at all. The buttons on the control panel (except for the POWER button) don't function. Abnormal sound is heard. Solution • This air comes out after cooling the inside of the projector. You may feel hot, but this is not a malfunction. • Check that the volume isn't set to low. • JThe microcomputers inside the projector may be wrongly operating because Press the POWER button to turn off the lamp and unplug the power cord of noise. from the wall outlet. Wait about 10 minutes, plug the power cord in, and try again. • This indication appears when the ambient temperature rises high. When the ambient temperature stays high, tJhe lamp goes out. Eliminate any causes of the rise in the ambient temperature. • This indication appears when the air inlet or outlet grille is blocked. When they are kept blocked, the lamp gJoesRoeumt.ove the objects blocking the air inlet or outlet grille. • This mark appears when ineffective operation is carried out. This isn't a product malfunction. • Check that the batteries are loaded in the remote control or the batteries are not weak. (See page 9.) • Check that the remote control sensor isn't exposed to direct sunlight or fluorescent light. (See page 9.) • Use the remote control within its operation range. (See page 9.) • Use the remote control at least 10 cm away from the projector. • PASSWORD FUNCTION in the FEATURE menu has been set to MENU ACCESS to enable the password lJock.Cancel the password lock or contact the person in charge of management of the projector. (See page 39.) • Because the color wheel spins at a high speed, metallic sounds may be heard in rare occasions. Such symptom is not a malfunction. EN-44