Polaroid Spectra User Guide - Page 21

Features 15 4 Select the 12 second setting by pressing the MODE button once again. The number of pictures left in the film pack will start flashing: 5 If the number of pictures left in the film pack is the number of pictures you want to take, press the MODE button once. If you want to take fewer pictures, press the down (៓) control button. When the number you want is displayed (for example, 4) press the MODE button once to return to the full display: If you wish to interrupt the series, press the self-timer button. To return the camera to fully automatic operation, press the Auto reset button. Note: When you use the 12 second setting to get into the picture, 12 seconds will pass before the first picture is taken. The time between the other pictures will be only 6 seconds. The camera will beep and the red indicator on the front of the camera will flash as described in the section the Se/f-timer Variable sequential pictures This feature allows you to preset the camera to whatever interval you want. For example, you can take 4 pictures and program the camera to take them 30 seconds apart with one press of the shutter button. To take variable sequential pictures: 1 Press the MODE button until you see only the sequential pictures symbol: 6 Be sure your subject is correctly framed in the viewfinder. Now press and release the shutter button. The camera will automatically begin taking the series of pictures. Note:The display disappears about every 40 seconds. Lightly press the MODE or shutter button to make it reappear.