Polaroid Spectra User Guide - Page 9

Operating instructions 3 e1 Picture counter (counts down to show how many pictures remain in the film pack and is used with the sequential pictures and multiple exposures features) f1 Indicator bar (shows that the feature above it is on) g1 Auto reset button (always returns the camera to fully automatic operation: electronic flash, autofocus and audio signals) This booklet describes the selection and use of each special feature individually, although most of the features may be used in combination with each other for creative picture-taking. You can turn the individual features on or off between pictures by pressing the MODE and control buttons. Note: Closing and reopening the camera will always reset it for fully automatic operation. If the display fails to react as expected when you press the control buttons, press the Auto reset button or close and reopen the camera to start again. Operating instructions Open camera Place both hands as shown (h1). Slide the release latch back. The camera will open automatically. Load film Use only Polaroid Spectra film. Push the film door release button down. The film door will open. Hold the film pack by its edges only (i1) and slide it all the way into the camera. As soon as you close the film door, the battery in the film pack will provide power to the camera and you will see: • the film cover eject • the liquid crystal display appear a green light indicating the flash is ready to fire. The liquid crystal display should look like this: If it does not, press the Auto reset button. Note: The display disappears about every 40 seconds. Lightly press the MODE or shutter button to make it reappear.