Poulan PP16H44A User Manual - Page 18

Cleaning

Page 18 highlights

CUSTOMER RESPONSIBILITIES TO CHANGE ENGINE OIL (See Figs. 21 and 22) Determine temperature range expected before oil change. All oil must meet API service classification SG. •. Be sure vehicle is on level surface. Oil will drain more freely when warm. Catch oil in a suitable container. See engine manual packed with your unit for further instructions. ENGINE OIL FILLER CAP AND DIPSTICK • ENGINE OIL FILTER Replace the engine oil filter every season or every other oh change if the tractor is used more than 100 hours in one year. See Engine Manual packed with your unit. MUFFLER Inspect and replace corroded muffler and spark arrester (ii equipped) as it could create a fire hazard and/or damage. SPARK PLUGS Replace spark plugs at the beginning of each mowing season or after every 100 hours of use, whichever comes first. Spark plug type and gap setting is shown in "PRODUCT SPECIFICATIONS" on page 3 of this manual. • FIG. 22 CLEAN AIR SCREEN Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stubborn dried gum fibers. CLEAN ENGINE COOLING FINS Remove any dust, dirt or oil from engine cooling fins to prevent damage from overheating. Air guide covers must be removed. See Engine Manual packed with your unit. AIR FILTER FOAM PRE-CLEANER Your engine will not run properly and may be damaged by using a dirty air filter. Clean the foam pre-cleaner element after every 25 hours of operation, more often if tractor is used in very dusty, dirty conditions. See Engine Manual packed with your unit. IN-LINE FUEL FILTER (See Fig. 23) Fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flow to carburetor, replacement is required. • With engine cool, remove filter and plug fuel line sections. • Place new fuel filter in position in fuel line with arrow pointing towards carburetor. • Be sure there are no fuel line leaks and clamps are properly positioned. • Immediately wipe up any spilled gasoline. CLAMP CLAMP ~...`-FUEL FILTER FIG. 23 CLEANING • Clean engine, battery, seat, finish, etc. of all foreign matter. • Keep finished surfaces and wheels free of all gasoline, oil, etc. • Protect painted surfaces with automotive type wax. We do not recommend using a garden hose to clean your unit unless the electrical system, muffler, air filter and carburetor are covered to keep water out. Water in engine can result in a shortened engine life. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

CUSTOMER
RESPONSIBILITIES
TO
CHANGE
ENGINE
OIL
(See
Figs.
21
and
22)
Determine
temperature
range
expected
before
oil
change.
All
oil
must
meet
API
service
classification
SG.
Be
sure
vehicle
is
on
level
surface.
Oil
will
drain
more
freely
when
warm.
Catch
oil
in
a
suitable
container.
See
engine
manual
packed
with
your
unit
for
further
instructions.
•.
ENGINE
OIL
FILLER
CAP
AND
DIPSTICK
FIG.
22
CLEAN
AIR
SCREEN
Air
screen
must
be
kept
free
of
dirt
and
chaff
to
prevent
engine
damage
from
overheating.
Clean
with
a
wire
brush
or
compressed
air
to
remove
dirt
and
stubborn
dried
gum
fibers.
CLEAN
ENGINE
COOLING
FINS
Remove
any
dust,
dirt
or
oil
from
engine
cooling
fins
to
prevent
damage
from
overheating.
Air
guide
covers
must
be
removed.
See
Engine
Manual
packed
with
your
unit.
AIR
FILTER
FOAM
PRE
-CLEANER
Your
engine
will
not
run
properly
and
may
be
damaged
by
using
a
dirty
air
filter.
Clean
the
foam
pre
-cleaner
element
after
every
25
hours
of
operation,
more
often
if
tractor
is
used
in
very
dusty,
dirty
conditions.
See
Engine
Manual
packed
with
your
unit.
ENGINE
OIL
FILTER
Replace
the
engine
oil
filter
every
season
or
every
other
oh
change
if
the
tractor
is
used
more
than
100
hours
in
one
year.
See
Engine
Manual
packed
with
your
unit.
MUFFLER
Inspect
and
replace
corroded
muffler
and
spark
arrester
(ii
equipped)
as
it
could
create
a
fire
hazard
and/or
damage.
SPARK
PLUGS
Replace
spark
plugs
at
the
beginning
of
each
mowing
season
or
after
every
100
hours
of
use,
whichever
comes
first.
Spark
plug
type
and
gap
setting
is
shown
in
"PROD-
UCT
SPECIFICATIONS"
on
page
3
of
this
manual.
IN
-LINE
FUEL
FILTER
(See
Fig.
23)
Fuel
filter
should
be
replaced
once
each
season.
If
fuel
filter
becomes
clogged,
obstructing
fuel
flow
to
carburetor,
re-
placement
is
required.
With
engine
cool,
remove
filter
and
plug
fuel
line
sections.
Place
new
fuel
filter
in
position
in
fuel
line
with
arrow
pointing
towards
carburetor.
Be
sure
there
are
no
fuel
line
leaks
and
clamps
are
properly
positioned.
Immediately
wipe
up
any
spilled
gasoline.
CLAMP
CLAMP
...
~`-FUEL
FILTER
FIG.
23
CLEANING
Clean engine,
battery,
seat,
fi
nish,
etc.
of
all
foreign
matter.
Keep
finished
surfaces
and
wheels
free
of
all
gasoline,
oil,
etc.
Protect
painted
surfaces
with
automotive
type
wax.
We
do
not
recommend
using
a
garden
hose
to
clean
your
unit
unless
the
electrical
system,
muffler,
air
fi
lter
and
carburetor
are
covered
to
keep
water
out.
Water
in
engine
can
result
in
a
shortened
engine
life.
18