Poulan PP16H44A User Manual - Page 22
OalmmED-1
![]() |
View all Poulan PP16H44A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
SERVICE AND ADJUSTMENTS TO REPLACE MOTION DRIVE BELT (See Figs. 34 & 35) Park the tractor on level surface. Engage parking brake. For ease of service, there is a belt installation guide decal on bottom side of left footrest. • Remove mower (See "TO REMOVE MOWER" in this section of this manual). • Remove belt from stationary idler. • Release parking brake. Pull belt as far as possible over top of clutching idler. • Reset parking brake. Pull belt over top of clutching idler. • Place top side of belt between blades of fan on input pulley and rotate clockwise. Remove belt from input pulley. • Using a 9/16" wrench, remove clutch locator. • Disconnect clutch wire connector. • Remove belt from electric clutch pulley. • Install new belt by reversing above procedure. TO ADJUST STEERING WHEEL ALIGNMENT If steering wheel crossbars are not horizontal (left to right, when wheels are positioned straight forward, remove steering wheel and reassemble per instructions in the Assembly section of this manual. FRONT WHEEL TOE-IN/CAMBER The front wheel toe-in and camber are not adjustable on your unit. If damage has occurred to affect the front wheel toe-in or camber, contact your nearest Authorized Service Center. DRAWBAR FAN MOTION DRIVE BELT O BELT KEEPER FIG. 34 INPUT PULLEY ELECTRIC CLUTCH PULLEY O CLUTCH LOCATOR O CLUTCHING IDLER almmED-1, STATIONARY IDLER INPUT PULLEY CLUTCH WIRE CONNECTOR FIG. 35 22
![](/manual_guide/products/poulan-pp16h44a-user-manual-77690ac/22.png)