Home » Poulan Manuals » Lawn & Garden » Poulan PPB4000C » Manual Viewer

Poulan PPB4000C User Manual

Poulan PPB4000C Manual

Get Poulan PPB4000C PDF manuals and user guides

View all Poulan PPB4000C manuals

Add to My Manuals
Save this manual to your list of manuals

Poulan PPB4000C manual content summary:

Poulan PPB4000C | User Manual - Page 1
BLOC-MOTEURS ÉLECTRIQUES PPB4000C DANGER: Read and follow all Safety Rules and Operating Instructions before using this product. Failure to do so can result in serious injury. Refer to your original manual for additional Warnings and Operating Instructions. PELIGRO: Lea el manual de instrucciones
Poulan PPB4000C | User Manual - Page 2
devices, wire, rope, string, etc. This attachment is designed for line trimmer use only. Failure to follow these instructions may result in serious injury. WARNING: The blade times. Read the operator's manual before use. Failure to follow instructions could result in serious injury. Save operator
Poulan PPB4000C | User Manual - Page 3
instructions. instructions in this manual moving parts. S brushcutter attachment (see ASSEMBLY). UNIT/MAINTENANCE SAFETY WARNING: Disconnect powerhead spark plug before performing maintenance. S Look for and replace damaged or loose parts head parts that are mm) diameter Poulan PRO brand line. Never
Poulan PPB4000C | User Manual - Page 4
do not use the shoulder strap for support. S Keep others away when making carburetor adjustments. S Use only recommended Poulan PRO accessories and replacement parts. S Have all maintenance and service not explained in this manual performed by an authorized service dealer. FUEL SAFETY S Mix and pour
Poulan PPB4000C | User Manual - Page 5
LOOSEN Knob TIGHTEN 2. Remove the shaft cap from the brushcutter attachment (if present). 3. Position locking/release button of attachment into guide recess of coupler. 4. Push the attachment into the coupler until the locking/release button snaps into the primary hole. 5. Before using the
Poulan PPB4000C | User Manual - Page 6
diameter. To assemble your unit, go to the section for the desired configuration and follow the instructions. ASSEMBLY INFORMATION -TRIMMER HEAD TRIMMER HEAD NOTE: Remove the blade and metal shield before attaching the plastic shield and trimmer head. To remove blade, align hole in the dust cup with
Poulan PPB4000C | User Manual - Page 7
the plastic shield, loosen and remove wing nut. Pivot shield to release bracket from slot. See INSTALLATION OF THE TRIMMER HEAD and ATTACHING THE PLASTIC SHIELD for illustrations. Be sure to store all parts and instructions for future use. Never use the trimmer head with the metal blade installed
Poulan PPB4000C | User Manual - Page 8
and nuts shown in the following illustrations. These parts must be provided by Poulan/ WEED EATER and installed as shown below. Failure to use proper parts can cause the blade to fly off and aligned holes. Unthread the nut and remove parts. Be sure to store parts and instructions for future use. 8
Poulan PPB4000C | User Manual - Page 9
OPERATION KNOW YOUR BRUSHCUTTER ATTACHMENT READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR BRUSHCUTTER ATTACHMENT. Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Shaft
Poulan PPB4000C | User Manual - Page 10
curely by turning clockwise. Coupler Primary Hole Guide Recess Upper Shaft Locking/ Release Attachment Button WARNING: Make sure the locking/re- and not crowded into material being cut. OPERATING INSTRUCTIONS FOR USE OF BRUSHCUTTER ATTACHMENT WITH TRIMMER HEAD WARNING: Always wear eye protec-
Poulan PPB4000C | User Manual - Page 11
an area. Keep the line parallel to and above the area surface and swing the tool from side to side. Sweeping OPERATING INSTRUCTIONS FOR BRUSHCUTTER ATTACHMENT S Blade Thrust is a reaction that only occurs when using a bladed unit. This reaction can cause serious injury such as amputation. Carefully
Poulan PPB4000C | User Manual - Page 12
support the weight of the unit, freeing your arms and hands to control and guide of the powerhead manual or contact your authorized service dealer. S PARTS Contact an authorized service dealer for replacement of damaged or worn parts. S Blade Shield -- Discontinue use of brushcut- ter attachment
Poulan PPB4000C | User Manual - Page 13
SERVICE AND ADJUSTMENTS REPLACING THE LINE 1. Remove spool by firmly pulling on tap button. 2. Clean entire surface of hub and spool. 3. Replace with a pre-wound spool, or cut two lengths of 12-1/2 feet of 0.080″ (2 mm) diameter Poulan PRO brand line. WARNING: Never use wire, rope, string, etc.,
Poulan PPB4000C | User Manual - Page 14
in the instruction manual. This warranty does not cover transportation costs. In the event you have a claim under this warranty, you must return the product to an authorized service dealer. Should you have any unanswered questions concerning this warranty, please contact: Poulan PRO, a division of