Poulan PPB4000C User Manual - Page 4

contacting any object. Hold the unit by hand; do not use the shoulder strap for support. S Keep others away when making carburetor adjustments. S Use only recommended Poulan PRO accessories and replacement parts. S Have all maintenance and service not explained in this manual performed by an authorized service dealer. FUEL SAFETY S Mix and pour fuel outdoors. S Keep away from sparks or flames. S Use a container approved for fuel. S Do not smoke or allow smoking near fuel or the unit or while using the unit. S Avoid spilling fuel or oil. Wipe up all fuel spills before starting engine. S Move at least 10 feet (3 meters) away from fu- eling site before starting engine. S Stop engine and allow it to cool before re- moving fuel cap. S Remove fuel cap slowly. CUTTING SAFETY WARNING: Inspect the area to be cut before each use. Remove objects (rocks, broken glass, nails, wire, string, etc.) which can be thrown or become entangled in the blade or trimmer line. S Keep others including children, animals, by- standers, and helpers at least 50 feet (15 meters) away. Bystanders should be encouraged to wear safety glasses. Stop engine immediately if you are approached. S Always keep engine on the right--hand side of your body. S Hold the unit firmly with both hands. S Keep firm footing and balance. Do not overreach. S Keep blade/trimmer head below waist level. S Do not raise powerhead engine above your waist. S Keep all parts of your body away from spinning line/blade and muffler. S Cut from your left to your right. Cutting on the right side of the shield will throw debris away from the operator. S Use only in daylight or good artificial light. S Use only for jobs explained in this manual. TRANSPORTING AND STORAGE S Stop the powerhead engine before carrying unit. S Keep muffler away from your body. S Allow engine to cool and secure unit before storing or transporting it in a vehicle. S Empty the fuel tank before storing or trans- porting the unit. Use up fuel left in the carburetor by starting the engine and letting it run until it stops. S Store unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc. S Store unit so the blade cannot accidentally cause injury. S Store unit indoors, out of reach of children. If situations occur which are not covered in this manual, use care and good judgment. If you need assistance, call 1--800--554--6723. SPECIAL NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool. SAVE THESE INSTRUCTIONS ASSEMBLY CARTON CONTENTS Check carton contents for the following: S Brushcutter attachment S Handlebar S Handlebar mounting bracket for 1″ shaft S Handlebar mounting bracket for 7/8″ shaft S Bracket cover (2) S Shoulder strap S Upper shoulder strap clamp S Lower shoulder strap clamp (with spacer tabs) S Handlebar bracket screws (4) S Shoulder strap clamp screws (2) S 4--point weed blade (assembled on brush- cutter attachment) S Large nut for installing blade S Retaining washer S Cupped washer S Metal shield (assembled on brushcutter at- tachment) S Trimmer head S Plastic shield S Wing nut (screwed onto plastic shield) S Attachment hanger S Hex wrench WARNING: If received assembled, re- peat all steps to ensure your unit is properly assembled and all fasteners are secure. Examine parts for damage. Do not use damaged parts. NOTE: If you need assistance or find that parts are missing or damaged, call 1-800-554-6723. TOOLS REQUIRED S Hex wrench (provided) INSTALLING BRUSHCUTTER ATTACHMENT CAUTION: When removing or installing attachments, place the unit on a flat surface for stability. 4