ProForm 100 Zlx Bike Uk Manual - Page 10
and Left Pulse Wires 64, 66.
View all ProForm 100 Zlx Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10. The Console (6) can use four D batteries (not included); alkaline batteries are recommended. 10 IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console displays or other electronic compo- nents. Remove the screws, remove the battery covers, and insert the batteries into the battery compartments. Make sure to orient the batter- ies as shown by the diagrams inside the battery compartments. Then, reattach the bat- tery covers. To purchase an optional power adapter, call the telephone number on the front cover of this manual. To avoid damaging the console, use only a manufacturer-supplied power adapter. Plug one end of the power adapter into the receptacle on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. Screws Batteries 6 Battery Covers Batteries 11. While a second person holds the Console (6) near the Upright (3), connect the wires on the Console to the Upper Wire (32) and to the Right and Left Pulse Wires (64, 66). Insert the excess wire downward into the Upright (3) or upward into the Console (6). Tip: Avoid pinching the wires. Attach the Console (6) to the Upright (3) with four M4 x 16mm Screws (40). 11 6 Avoid pinching the wire 32 3 40 64 66 10