ProForm 100 Zlx Bike Uk Manual - Page 6
Connect the Upper Wire 32 to the Lower Wire
 |
View all ProForm 100 Zlx Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. To make assembly easier, read the 1 information on page 5 before you begin. Identify the Rear Stabilizer (14), which has a Leveling Foot (63) near each end. Attach the Rear Stabilizer (14) to the Frame (1) with two M10 x 75mm Patch Screws (36). 14 63 36 2. Attach the Front Stabilizer (2) to the Frame (1) with two M10 x 75mm Patch Screws (36). 2 1 63 2 36 1 3. Orient the Upright (3) and the Top Shield (9) as shown. 3 Have a second person hold the Upright (3) and the Top Shield (9) near the Frame (1) until you complete step 4. Connect the Upper Wire (32) to the Lower Wire (31). Then, pull the excess Upper Wire out of the top of the Upright. 3 9 31 1 32 6
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
6
1.
Identify the Rear Stabilizer (14), which has a
Leveling Foot (63) near each end.
Attach the Rear Stabilizer (14) to the Frame (1)
with two M10 x 75mm Patch Screws (36).
2.
Attach the Front Stabilizer (2) to the Frame (1)
with two M10 x 75mm Patch Screws (36).
1
To make assembly easier, read the
information on page 5 before you begin.
3.
Orient the Upright (3) and the Top Shield (9) as
shown.
Have a second person hold the Upright (3) and
the Top Shield (9) near the Frame (1) until you
complete step 4.
Connect the Upper Wire (32) to the Lower Wire
(31). Then, pull the excess Upper Wire out of
the top of the Upright.
3
36
63
63
36
9
1
31
32
14
1
1
2
3
2