ProForm 1050 Bike English Manual - Page 20

If you select Advanced Wifi Setup

Get ProForm 1050 Bike PDF manuals and user guides View all ProForm 1050 Bike manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

HOW TO USE THE SETTINGS MODE 1. Select the settings mode. Turn on the console (see HOW TO TURN ON THE CONSOLE on page 15). From the main menu, select Settings. The settings menu will appear in the display. 2. Connect to a wireless network. From the settings menu, select WiFi. Then, select Standard Wifi Setup, Advanced Wifi Setup, or WPS Setup. Note: You must have your own wireless network and an 802.11b/g/n router with SSID broadcast enabled (hidden networks are not supported). The iFit mode supports unsecured and secured (WEP, WPA, and WPA2) encryption. A broadband connection is recommended; performance depends on connection speed. If you select Standard Wifi Setup, a list of wireless networks will appear in the display. Select the desired network. Note: It may take a few moments for the list of networks to appear. You will need to know your network name (SSID) for the standard setup. If your network has a password, you will also need to know the password. The keyboard will then appear in the display. Use the navigation buttons to highlight the desired character, symbol, or operator and press the Enter button to select the character, symbol, or operator. Continue entering your password (passphrase) in this manner. After you enter your password, select Done. If you are having problems connecting to the selected network, make sure that your password is correct. Note: Passwords are case-sensitive. The display will inform you when the console has connected to your wireless network. Press the Enter button to close the standard setup mode. If you select Advanced Wifi Setup, a list of wireless networks will appear in the display. Select the desired network. Note: It may take a few moments for the list of networks to appear. Note: You will need to know your network name (SSID), your network password, your IP address, your netmask, your gateway address, and your global DNS server for the advanced setup. The keyboard will then appear in the display. Use the navigation buttons to highlight the desired character, symbol, or operator and press the Enter button to select the character, symbol, or operator. Continue entering your password (passphrase) in this manner. After you enter your password, select Done. Repeat these actions to enter your IP address, your netmask, your gateway address, and your global DNS. If you are having problems connecting to the selected network, make sure that you have entered case-sensitive information correctly. The display will inform you when the console has connected to your wireless network. Press the Enter button to close the advanced setup mode. If you select WPS Setup, follow the instructions that appear in the display. Note: If you have questions after following these instructions, go to support.iFit.com for assistance. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
20
HOW TO USE THE SETTINGS MODE
1.
Select the settings mode.
Turn on the console (see HOW TO TURN ON THE
CONSOLE on page 15). From the main menu,
select Settings. The settings menu will appear in
the display.
2.
Connect to a wireless network.
From the settings menu, select WiFi. Then, select
Standard Wifi Setup, Advanced Wifi Setup, or WPS
Setup.
Note: You must have your own wireless network
and an 802.11b/g/n router with SSID broadcast
enabled (hidden networks are not supported).
The iFit mode supports unsecured and secured
(WEP, WPA, and WPA2) encryption. A broadband
connection is recommended; performance depends
on connection speed.
If you select Standard Wifi Setup,
a list of wire-
less networks will appear in the display. Select the
desired network.
Note: It may take a few moments for the list of
networks to appear. You will need to know your
network name (SSID) for the standard setup. If
your network has a password, you will also need to
know the password.
The keyboard will then appear in the display. Use
the navigation buttons to highlight the desired
character, symbol, or operator and press the Enter
button to select the character, symbol, or operator.
Continue entering your password (passphrase) in
this manner. After you enter your password, select
Done.
If you are having problems connecting to the
selected network, make sure that your password is
correct. Note: Passwords are case-sensitive.
The display will inform you when the console has
connected to your wireless network. Press the
Enter button to close the standard setup mode.
If you select Advanced Wifi Setup,
a list of wire-
less networks will appear in the display. Select the
desired network. Note: It may take a few moments
for the list of networks to appear.
Note: You will need to know your network name
(SSID), your network password, your IP address,
your netmask, your gateway address, and your
global DNS server for the advanced setup.
The keyboard will then appear in the display. Use
the navigation buttons to highlight the desired
character, symbol, or operator and press the Enter
button to select the character, symbol, or operator.
Continue entering your password (passphrase) in
this manner. After you enter your password, select
Done.
Repeat these actions to enter your IP address,
your netmask, your gateway address, and your
global DNS.
If you are having problems connecting to the
selected network, make sure that you have entered
case-sensitive information correctly.
The display will inform you when the console has
connected to your wireless network. Press the
Enter button to close the advanced setup mode.
If you select WPS Setup,
follow the instructions
that appear in the display.
Note: If you have questions after following
these instructions, go to support.iFit.com for
assistance.