ProForm 1050 Bike English Manual - Page 22
How To Use The Maintenance Mode
View all ProForm 1050 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
HOW TO USE THE MAINTENANCE MODE 4. Restore the default settings. 1. Select the settings mode. See step 1 on page 20. From the maintenance menu, select Restore Defaults. Then, press Enter to restore the console to the original settings from the factory. 2. Select the maintenance mode. From the settings menu, select Maintenance. The maintenance menu will appear in the display. When you select a menu option from the maintenance menu, the top of the display will show information about the model and version of the exercise bike. If the console is connected to the controller of the exercise bike, the controller dot will be green; if it is not connected, the dot will be red. If the exercise bike is connected to your wireless network, the network dot will be green; if it is not connected, the dot will be red. 3. Update the console firmware. For the best results, regularly check for firmware updates. From the maintenance menu, select Firmware Update. Press the Enter button to download the latest firmware for the console. IMPORTANT: To avoid damaging the exercise bike, do not unplug the power adapter while the firmware is being updated. After you restore the default settings, unplug the power adapter, wait for several seconds, and then plug in the power adapter. 5. View technical information. From the maintenance menu, select Technical Info. View the total number of hours that the exercise bike has been used, the total distance that has been pedaled, and other information. After you view the information, press the Enter button. The display will return to the settings menu. 6. Perform a network test. From the maintenance menu, select Network Test. The console will run a network test and check the connection status of the console and the exercise bike. After you view the results of the network test, press the Enter button. The display will return to the settings menu. 7. Exit the maintenance mode. To exit the maintenance mode, press the Home button. The display will show the progress of the update. When the update is complete, unplug the power adapter, wait for several seconds, and then plug in the power adapter. It may take a few minutes for the console to be ready for use. 22