ProForm 280 Zlx Bike Uk Manual - Page 18
HOW TO ADJUST THE BELT, there, are two sizes of screws in the shields-note which, size of screw
View all ProForm 280 Zlx Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
HOW TO ADJUST THE BELT If you can feel the pedals slip while you are pedaling, even when the resistance is at the highest level, the belt may need to be adjusted. To adjust the belt, the pedals and the shields must be removed. Next, loosen the 3/8" Nuts (27), which are located on each side of the Flywheel (37). Then, tighten the M6 Locknuts (32), one on each side of the Flywheel, until the Belt (35) is properly tightened. Use an adjustable wrench to remove the pedals. To remove the left pedal, turn the left pedal clockwise; to remove the right pedal, turn the right pedal counterclockwise. Next, remove all of the screws from both shields; there are two sizes of screws in the shields-note which size of screw you remove from each hole. Then, carefully remove the shields. 35 27 32 37 32 27 Finally, tighten the 3/8" Nuts (27) and reattach the shields and the pedals. 18