ProForm 280 Zlx Bike Uk Manual - Page 7
Clamp 54, the Rear Cover 3, and the Pivot
View all ProForm 280 Zlx Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. While another person holds the Upright (13) near the Frame (1), connect the Upper Wire 3 Harness (23) to the Lower Wire Harness (68). Insert the excess wire downward into the Frame (1). Tip: Avoid pinching the wires. Insert the Upright (13) into the Frame (1). Attach the Upright with three M8 x 16mm Patch Screws (34) and three M8 Split Washers (42). 13 Avoid pinching the wires 34 42 23 34 1 4. While another person holds the Handlebar (50) near the Upright (13), insert the Pulse Wires 4 (59) into the Upright and pull them upward out of the top of the Upright. Tip: Avoid pinching the wires. Attach the Handlebar (50) to the Upright (13) with the Pivot Clamp (54), the Rear Cover (3), and the Pivot Handle (55). Note: The Pivot Handle (55) functions like a ratchet. Turn the Pivot Handle clockwise, pull it away from the Upright (13), turn it counterclockwise, push it toward the Upright, and then turn it clockwise again. Repeat this process until the Pivot Handle is tight. Attach the Rear Cover (3) to the Upright (13) with an M4 x 15mm Screw (48). 13 23 Avoid pinching the wires 54 3 7