ProForm 3.6 Uk Manual - Page 12

13. Raise the Frame (not shown) to the position 13 shown. Have a second person hold the Frame until step 15 is completed. Identify the Latch Assembly (72). Make sure that the sleeve has been slid over the indicated hole and that the Latch Knob (74) is locked into the hole. Pull on the sleeve to make sure that it is locked into place. Tube Sleeve 72 74 Hole 14. Attach the Latch Bracket (71) to the Base (85) 14 with two 3/8" x 2" Bolts (27) and two 3/8" Jamnuts (31). Attach the upper end of the Latch Assembly (72) to the bracket on the Frame (48) with a 3/8" x 2" Bolt (27) and a 3/8" Jamnut (31). Note: It may be necessary to move the Frame back and forth to align the Latch Assembly with the bracket. Lower the Frame (48) (see HOW TO LOWER THE TREADMILL FOR USE on page 21). 48 31 27 72 71 85 31 27 15. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt (see pages 23 and 24). 12