ProForm 300 Cr Bike English Manual - Page 11
Plug the Pulse Wire 58 into the Pulse
View all ProForm 300 Cr Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. Plug the Pulse Wire (58) into the Pulse Receptacle (79) located in the Left Shield (26). 10 58 79 26 11. Identify the Right Pedal (21), which is marked with an "R." Using an adjustable wrench, firmly 11 tighten the Right Pedal clockwise into the Right Crank (23). Tighten the Left Pedal (not shown) counterclockwise into the Left Crank (not shown). Adjust the strap on the Right Pedal (21) to the desired position, and press the ends of the strap onto the tab on the Right Pedal. Adjust the strap on the Left Pedal (not shown) in the same way. 23 21 Strap Tab 12. Make sure that all parts are properly tightened before you use the exercise bike. Note: After assembly is completed, some extra parts may be left over. Place a mat beneath the exercise bike to protect the floor. 11