ProForm 300 Cr Bike English Manual - Page 8

4. Identify the Right and Left Handlebars (59, 60), 4 which are marked with "Right" and "Left" stickers. Orient the Right and Left Handlebars (59, 60) 60 so that the hexagonal holes are in the indi- cated locations. Attach each Handlebar (59, 60) to the Upright (2) with two M8 x 38mm Button Bolts (72) and two M8 Locknuts (61). Make sure that the Locknuts are in the hexagonal holes. 61 Hexagonal Holes 61 72 2 59 72 5. The Console (4) can use four 1.5V D batteries (not included); alkaline batteries are recom- 5 mended. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before insert- ing batteries. Otherwise, you may damage the console displays or other electronic components. Remove the screw, remove the battery cover, and insert the batteries into the battery compartment. Make sure to orient the batteries as shown by the diagrams inside the battery compartment. Then, reattach the battery cover. To purchase an optional power adapter, call the telephone number on the cover of this manual. To avoid damaging the console, use only a manufacturer-supplied power adapter. Plug one end of the power adapter into the receptacle on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. Screw Batteries 4 Battery Cover Batteries 8