ProForm 300 Cr Bike English Manual - Page 17

HOW TO USE THE SOUND SYSTEM To play music or audio books through the console sound system while you exercise, plug an audio cable (not included) into the jack on the console and into a jack on your MP3 player or CD player; make sure that the audio cable is fully plugged in. Next, press the play button on your MP3 player or CD player. Adjust the volume level using the volume control on your MP3 player or CD player. HOW TO CHANGE CONSOLE SETTINGS The console features a user mode that allows you to select a unit of measurement and a backlight option for the console and to view console usage information. 1. Select the user mode. To select the user mode, press and hold down the Priority Display button for a few seconds until the user mode information appears in the display. 2 Select a backlight option if desired. The console has three backlight options. The ON option keeps the backlight on while the console is on. The AUTO option keeps the backlight on only while you are pedaling. The OFF option turns the backlight off. The upper display will show the currently selected backlight option. Press the Silent Magnetic Resistance increase button repeatedly to select the desired backlight option. 3. Select a unit of measurement if desired. The console can show pedaling speed and distance in either miles or kilometers. The lower right display will show the selected unit of measurement. An E for English miles or an M for metric kilometers will appear in the lower right display. To change the unit of measurement, press the Silent Magnetic Resistance decrease button repeatedly. Note: When you replace the batteries, it may be necessary to reselect the unit of measurement. 4. View console usage information if desired. The lower left display will show the total number of hours that the console has been used since the exercise bike was purchased. 5. Exit the user mode. Press the Priority Display button to save the console settings and exit the user mode. 17