ProForm 305 Cst Instruction Manual - Page 11
If You Do Not Connect
View all ProForm 305 Cst manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. With the help of a second person, hold the console assembly (K) near the Right Handrail (64). See the inset drawing. Connect the Upright Wire (63) to the console wire (L). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie (D) from the Upright Wire. Connect the two Console Ground Wires (88) to the two ground wires (M) on the Console Crossbar (61). 10 K L 63 64 61 D M 88 L 63 11. Insert the Wires (63) into the Right Handrail (64) through the indicated hole (N) as you set the console assembly on the Left and Right Uprights (66, 76). Make sure that no wires (63, 88) are pinched. Attach the console assembly (K) with ten #8 x 3/4" Screws (4); start all ten Screws, and then tighten them. Do not overtighten the Screws. See step 5. Firmly tighten the six 3/8" x 3 1/4" Screws (2). 11 63 N 64 4 4 76 K 88 4 4 4 66 11