ProForm 650 Elliptical Uk Manual - Page 8
L. Attach the Left Pedal to the Left Pedal Arm 14
View all ProForm 650 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
7. Slide the Right Crank Arm (38) onto the four indicated welded bolts; make sure that the Right Crank Arm is in the indicated cutout in the Pedal Disk (8). Next, finger tighten four M8 Jamnuts (104) onto the welded bolts. Then, fully tighten one of the Jamnuts, and then tighten the Jamnut farthest from the first Jamnut. Then, tighten the remaining two Jamnuts. Attach a Hub Cover (48) to the Right Crank Arm (38) with four Cover Screws (82). Then, tighten an Adjustment Knob (45) onto the right Adjustment Pin (17). 7 Cutout Welded Bolts 104 48 8 38 104 82 17 45 8. Attach a Pedal Bracket (16) to the Left Pedal Arm (14) 8 with two M8 x 53mm Button Screws (84). Attach the other Pedal Bracket (not shown) to the Right Pedal Arm (75) in the same way. 14 75 84 9. Identify the Left Pedal (12), which is marked with an "L." Attach the Left Pedal to the Left Pedal Arm (14) with two M8 x 16mm Button Screws (91) and two M8 Split Washers (83). Attach the Right Pedal (not shown) to the Right Pedal Arm (75) in the same way. 9 14 16 12 75 83 91 83 91 8