ProForm Endurance 520 E Elliptical English Manual - Page 10
Tip: To prevent the Upper Wire 110
View all ProForm Endurance 520 E Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
5. Orient the Upright (4) as shown. Have a second person hold the Upright near the Frame (1). 5 See the inset drawing. Locate the wire tie in the lower end of the Upright (4). Tie the wire tie to the Upper Wire (110). Then, pull the upper end of the wire tie until the Upper Wire is routed through the Upright. Tip: To prevent the Upper Wire (110) from falling into the Upright (4), secure the Upper Wire with the wire tie. 110 4 Wire Tie 1 Wire Tie 110 6. Tip: Avoid pinching the Upper Wire (110). Avoid damaging the indicated plastic tabs. 6 Set the Upright (4) on the Frame (1). Attach the Upright (4) with four M10 x 25mm Screws (92) and four M10 Split Washers (105); start all of the Screws, and then tighten them. Avoid pinching the Upper Wire (110) and avoid damaging the tabs 110 92 105 Tabs 4 92 105 1 10