ProForm Endurance 520 E Elliptical English Manual - Page 12
Pulse Sensor Wires 63.
View all ProForm Endurance 520 E Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
9. Untie and discard the wire tie on the Upper Wire (110). While a second person holds the Console (7) near the Upright (4), connect the wires on the Console to the Upper Wire (110) and to the Pulse Sensor Wires (63). Insert the excess wire into the Upright (4) or into the Console (7). 9 7 63 110 4 10. Tip: Avoid pinching the wires. Attach the Console (7) to the Upright (4) with four M4 x 10 16mm Screws (101); start all of the Screws, and then tighten them. 7 Avoid pinching the wires 101 4 101 12
12
9
7
4
63
110
9.
Untie and discard the wire tie on the Upper
Wire (110).
While a second person holds the Console (7)
near the Upright (4), connect the wires on the
Console to the Upper Wire (110) and to the
Pulse Sensor Wires (63).
Insert the excess wire into the Upright (4) or into
the Console (7).
10
Avoid pinching
the wires
7
10.
Tip: Avoid pinching the wires.
Attach the
Console (7) to the Upright (4) with four M4 x
16mm Screws (101);
start all of the Screws,
and then tighten them.
101
101
4