ProForm Endurance 520 E Elliptical English Manual - Page 13
Right Upper Body Leg 60, insert the Pedal Arm
View all ProForm Endurance 520 E Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
11. Orient the Right Pedal Arm (58) as shown. Apply grease to the axle on the Right Pedal Arm (58). Attach the Right Pedal Arm (58) to the Right Roller Arm (59) with an M8 x 14mm Shoulder Screw (120), a Small Axle Cover (55), and an M8 Washer (97). Repeat this step for the Left Pedal Arm (44). 11 44 120 55 59 97 58 Grease 12. Apply a small amount of grease to one of the Pedal Arm Axles (64). 12 Next, slide an M8 Washer (97) and an Axle Spacer (77) onto an M8 x 13mm Screw (82), and tighten the Screw a few turns into the Pedal Arm Axle (64). While a second person holds the front end of the 46 Right Pedal Arm (58) inside the bracket on the Right Upper Body Leg (60), insert the Pedal Arm Axle (64) into both parts. Slide an M8 Washer (97) and an Axle Spacer (77) onto another M8 x 13mm Screw (82), and tighten the Screw a few turns into the Pedal Arm Axle (64). Then, tighten both Screws at the same time. Repeat this step on the other side of the elliptical. 82 97 77 60 Grease 64 77 97 58 82 13