ProForm Performance 1250 Treadmill Uk Manual - Page 11

10. With the help of a second person, hold the console assembly near the Left Handrail (88). 10 Connect the Upright Wire (81) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire. Console Wire 81 Console Assembly Console Wire 81 Wire Tie 88 11. Set the console assembly on the Right and Left Handrails (87, 88). Be careful not to pinch any 11 wires. Insert the excess Upright Wire (not shown) into the Left Handrail. Attach the console assembly with six #8 x 1/2" Screws (1), four 5/16" x 1 1/4" Screws (4), four 5/16" Flat Washers (113), and four 5/16" Star Washers (11). Start all ten Screws, and then 11 tighten each of them. 113 See step 7. Fully tighten the four 5/16" x 1" Screws (5) and the two 5/16" x 1 1/4" Screws 4 (4). 87 1 Console Assembly 88 11 113 4 1 11