ProForm Performance 1250 Treadmill Uk Manual - Page 20
setting. The incline must be at the lowest set
View all ProForm Performance 1250 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
6. Measure your heart rate if desired. 7. Turn on the fan if desired. Note: If you use the handgrip heart rate monitor and the chest heart rate monitor at the same time, the console will not display your heart rate accurately. For information about the chest heart rate monitor, see page 15. Before using the handgrip heart rate monitor, remove the sheets of plastic from the metal contacts. In addition, make sure that your hands are clean. Contacts To measure your heart rate, stand on the foot rails and hold the metal contacts with your palms; avoid moving your hands. When your pulse is detected, several dashes will appear and then your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds. The fan features several speed settings. Press Fan Increase the Fan increase or de- crease button to select a fan speed or to turn off the fan. Note: If the fan is on when the walking Fan Decrease belt is stopped, the fan will turn off automatically after a few minutes. 8. When you are finished exercising, remove the key from the console. Step onto the foot rails, press the Stop button, and adjust the incline of the treadmill to the lowest setting. The incline must be at the lowest setting or you may damage the treadmill when you fold it to the storage position. Next, remove the key from the console and put it in a secure place. When you are finished using the treadmill, press the power switch into the off position and unplug the power cord. IMPORTANT: If you do not do this, the treadmillʼs electrical components may wear prematurely. 20