ProForm Performance 1500 Instruction Manual - Page 11
Screws 4 and the six #8 x 3/4 Screws 2., Remove and save the four 5/16 x 3/4
View all ProForm Performance 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
8. Insert the Upright Wire (81) into the bottom of the right handrail assembly (E) and out of the 8 front as shown. Attach the right handrail assembly (E) to the Right Upright (90) with two 5/16" x 2 1/2" Screws (28) and two 5/16" Star Washers (11); do not fully tighten the Screws yet. Make sure not to pinch the Upright Wire (81). Then, remove and discard the indicated screw (D). 28 11 E D 81 90 9. Set the Console Base (64) face down on a soft surface to avoid scratching the Console Base. If 9 there are ties securing the Pulse Crossbar (93) to the Console Base, remove the ties. 4 2 18 64 2 Remove and discard the four indicated screws 2 (F). Then, remove the Pulse Crossbar (93). R emove and save the four 5/16" x 3/4" Screws (4) and the six #8 x 3/4" Screws (2). Then, lift out the two Console Clamps (41) and the Console Frame (18). F 41 4 Tie 93 2 Tie 11