ProForm Performance 1500 Instruction Manual - Page 14
You Do Not Connect The Connectors, Damaged When You Turn On
View all ProForm Performance 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
15. Insert the Upright Wire (81) and the handrail wire (G) through the two indicated looped ties on the 15 console assembly (H). See the inset drawing. Connect the Upright Wire (81) and the handrail wire (G) to the console wires. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Insert all excess wires into the console assembly (H). Then, pull the two ties tight against the wires and cut off the ends of the ties. 16. Insert the handrail wire (G) on the left side through the two indicated looped ties on the con- 16 sole assembly (H) and connect the handrail wire to the console wire. Insert all excess wires into the console assembly (H). Then, pull the two ties tight against the wires and cut off the ends of the ties. H Ties Console 81 Wire G Console Wires 81 G H Console Wire Ties G 14