ProForm Performance 1500 Instruction Manual - Page 12
start both Screws, and then tighten them., Make sure not to pinch the Upright Wire 81
View all ProForm Performance 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
10. Identify the Right and Left Trays (27, 36). Attach the Trays (27, 36) to the Console Base (64) with eight #8 x 1/2" Screws (1); do not overtighten the Screws. Reattach the Console Frame (18) with the six #8 x 3/4" Screws (2) and the two Console Clamps (41) that you removed in step 9; do not overtighten the Screws. 10 2 2 18 1 27 1 41 2 41 2 1 1 64 36 11. IMPORTANT: To avoid damaging the Pulse Crossbar (93), do not use power tools and do not overtighten the #10 x 3/4" Screws (9). Orient the Pulse Crossbar (93) as shown. Attach 11 9 86 28 5 G the Pulse Crossbar to the Handrails (86) with two #10 x 3/4" Screws (9) and two #10 Star Washers 93 (5); start both Screws, and then tighten them. Make sure not to pinch the Upright Wire (81) or the handrail wires (G). Next, firmly tighten the four 5/16" x 2 1/2" Screws (28). Then, remove the wire tie from the Upright Wire (81). 9 5G 28 86 81 Wire Tie 12