ProForm Performance 300i Uk Manual - Page 10

8. Attach the console assembly (B) with ten #8 x 3/4" Screws (79); start all ten Screws, and 8 B then tighten them. Make sure that no wires are pinched. Next, insert the wires into the console assem- bly (B). Then, tighten the three Wire Ties (75) around the wires and cut off the ends of the Wire 75 Ties. 79 79 79 79 9. Locate the Latch Crossbar (34). Remove and save the two 5/16" x 3/4" Crossbar Screws (85) from the Crossbar. Raise the Frame (50) to the upright position. IMPORTANT: Have a second person hold the Frame until step 11 is completed. Orient the Latch Crossbar (34) as shown. Make sure that the "This side toward belt" sticker (F) is facing the treadmill. Attach the Latch Crossbar to the brackets (G) on the Frame (50) with the two 5/16" x 3/4" Crossbar Screws (85) and two 5/16" Star Washers (27). 9 50 27 85 G F 34 G 27 85 10