ProForm Performance 300i Uk Manual - Page 8

do not fully tighten the Screws

Get ProForm Performance 300i PDF manuals and user guides View all ProForm Performance 300i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

3. Tighten a 3/8" x 2 1/4" Screw (81) and a 3/8" x 3/4" Screw (2) into the Base (36) and into 3 the Right Upright (84) as shown; do not fully tighten the Screws yet. Repeat this step on the left side of the treadmill. Then, tighten all four Screws (2, 81). 84 81 2 36 4. Attach the Left and Right Handrails (69, 86) to the Left and Right Uprights (73, 84) with two 3/8" x 2 3/4" Screws (1) and two 5/16" x 3/4" Screws (4) as shown; do not fully tighten the Screws yet. Then, remove and discard the four indicated screws (A). 4 1 A 69 4 1 73 A 86 84 4 5. Set the console assembly (B) face down on a soft surface to avoid scratching the console 5 assembly. B Remove and discard the two indicated screws (C). Then, remove the Pulse Crossbar (97). C 97 C 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
8
3.
Tighten a 3/8" x 2 1/4" Screw (81) and a 3/8"
x 3/4" Screw (2) into the Base (36) and into
the Right Upright (84) as shown;
do not fully
tighten the Screws yet.
Repeat this step on the left side of the tread
-
mill. Then, tighten all four Screws (2, 81).
3
2
36
84
81
4.
Attach the Left and Right Handrails (69, 86) to
the Left and Right Uprights (73, 84) with two 3/8"
x 2 3/4" Screws (1) and two 5/16" x 3/4" Screws
(4) as shown;
do not fully tighten the Screws
yet.
Then, remove and discard the four indicated
screws (A).
4
1
4
4
73
84
86
69
A
1
A
5
5.
Set the console assembly (B) face down on
a soft surface to avoid scratching the console
assembly.
Remove and discard the two indicated screws
(C). Then, remove the Pulse Crossbar (97).
C
97
C
B