ProForm Performance 300i Uk Manual - Page 12

12. S lide the Right Inner Upright Cap (105) between the Right Upright (84) and the Motor Hood (56). 12 Then, press the Right Outer Upright Cap (106) against the Right Inner Upright Cap until they snap together. Repeat this step on the left side of the treadmill with the Left Outer and Inner Upright Caps (103, 104) (not shown). 84 105 56 106 13. A ttach the Tablet Holder (96) with four #8 x 3/8" Screws (95); start all four Screws, and then 13 tighten them. Do not overtighten the Screws. 96 95 95 14. Make sure that all parts are properly tightened before you use the treadmill. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see page 24). Note: Extra parts may be included. 12