ProForm Performance 950 Instruction Manual - Page 11
onto the Right Upright 85. Slide the Left Base
View all ProForm Performance 950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
8. Identify the Right Base Cover (91) and the Left 8 Base Cover (88). Slide the Right Base Cover onto the Right Upright (85). Slide the Left Base 84 Cover onto the Left Upright (84). 88 9. Hold the Right Handrail (83) near the Right Upright (85). Insert the Upright Wire (87) through the indicated bracket on the Right Handrail, and pull the Upright Wire out of the end of the Right Handrail. Attach the Right Handrail (83) to the Right Upright (85) with three 5/16" x 1" Bolts (4) and three 5/16" Star Washers (13) as shown. Do not tighten the Bolts yet. Attach the Left Handrail (not shown) in the same way. Note: There is no wire on the left side. 9 87 4 13 83 85 91 4 13 85 10. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Remove the two #8 x 3/4" Screws (1). Next, lift off the Crossbar (107). Discard the Screws. 10 1 107 Console Assembly 11