ProForm Performance 950 Instruction Manual - Page 12
If You Do Not Connect The Con
View all ProForm Performance 950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
11. IMPORTANT: To avoid damaging the Crossbar (107), do not use power tools and 11 2 do not overtighten the #10 x 3/4" Screws (2). 12 Orient the Crossbar (107) as shown. Attach the Crossbar to the Handrails (82, 83) with four #10 x 3/4" Screws (2) and four 1/4" Star Washers 82 (12). Start all four Screws, and then tighten each of them. 107 2 12 83 12. With the help of a second person, hold the console assembly near the Right Handrail (83). Connect the Upright Wire (87) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. 12 Console Assembly Console Wire 87 Wire Tie Console Wire 87 83 12