ProForm Space Saver 785 English Manual - Page 15
How To Adjust The Position Of The Tv
View all ProForm Space Saver 785 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
6 Follow your progress during the program with the exercise feedback shown on the TV. As you exercise, the TV will display the elapsed time and the speed for seven sec- onds, the distance and the incline for seven seconds, and 7:20 SPEED 6 . 0 then the numbers of calories and fat calories burned for seven seconds. The cycle will then repeat. By pressing the SCREEN OPTIONS and HIDE buttons, you can modify the way that exercise feedback is shown on the TV. The different options are described on page 11 (see F and G). Note: The white indicators and other program information will be shown on the TV only when screen option 1 is selected. 7 When you are finished exercising, stop the walking belt and remove the key. Step onto the foot rails and remove the key from the console. A message on the TV will verify that the treadmill is ready to be folded. After removing the key, be sure to store it in a secure place. Move the on/off switch to the ÒoffÓ position. (See the drawing near the top of page 13.) SELECT buttons. The words ÒBOTTOM LINEÓ or ÒTOP LINEÓ will show which setting is selected. To see more user information, press the ENTER button. After the ENTER button is pressed, the TV will show the total number of hours that the treadmill HISTORY 10 HOURS 49 MILES has been used, and the total number of miles that the walking belt has PRESS STOP TO EXIT OR ENTER TO CONTINUE moved. (Note: When the total number of hours exceeds 999, it will reset to zero; when the total number of miles exceeds 99,999, it will reset to zero.) To see more user information, press the ENTER button. If the text displayed on the TV is too far to the right or left side of the screen, the text can be centered. To center the text, press the SELECT buttons while the message at the right appears on the TV. USE SELECT ARROWS TO ADJUST TEXT LEFT OR RIGHT PRESS STOP TO EXIT OR ENTER TO CONTINUE To exit the information mode at any time, press the STOP button. HOW TO ADJUST THE POSITION OF THE TV To turn off the TV, press the POWER button on the TV or the remote control. HOW TO SELECT THE INFORMATION MODE The console features an information mode that lets you modify the format of text displayed on the TV and shows the total time and distance accumulated on the treadmill. To access the information mode, first make sure that the on/off switch located on the front of the motor hood is in the ÒonÓ position. In addition, make sure that the power cord is properly plugged in (see page 9). Press the POWER button on the TV or the remote control to turn the TV on. The TV can be adjusted to any of four positions for the most comfortable viewing. To adjust the position, squeeze the lock tabs under the TV, slide the TV forward or backward, and release the tabs. Move the TV slightly for- ward or back- ward to make sure that it is locked in posi- Lock Tabs tion. Next, hold down the STOP button, insert the key into the console, and continue holding down the STOP but- ton until the TV displays the information shown at the right. When single lines of text are displayed on the TV, the text can appear at either the bot- SELECT OPTION TOP LINE tom or the top of the screen. To change the po- PRESS STOP TO EXIT OR ENTER TO CONTINUE sition of the text, press the 15