ProForm Space Saver 785 English Manual - Page 18
Direct Channel Selection by Remote Control
View all ProForm Space Saver 785 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Turning on the Power To turn on the TV, press the POWER button on the TV or the remote control. Volume Control To adjust the volume to the desired level, press the VOLUME + or Ð button. The sound level will be shown by a bar on the TV screen. As the sound level is increased, the bar will move to the right. As the sound level is decreased, VOLUME the bar will move to the left. Note: If no broadcasting signal is received, the sound will be muted and the vol- ume control will be disabled. Direct Channel Selection (by Remote Control) Use the channel selection buttons on the remote control to select a channel number. The channel number will appear on the upper right corner of the TV screen. For channels 2 through 9, press the 0 button and then press the desired channel number (if the 0 button is not pressed first, channel selection will be delayed for 3 seconds). For channels 10 through 99, press the two digits in order. Be sure to press the second digit within 3 seconds after pressing the first. For CATV channels over 100, press the 1-- button first and then press the desired channel numbers. Skip Mode Æ Press the CHANNEL Æ or button to select memo- rized channels, skipping ovÆer empty channels. Hold down the CHANNEL Æ or button to change channels continuously. Note: If no channels are memorized, the TV will switch to the SEARCH mode. Search Mode Æ Press the CHANNEL Æ or button to search for the nÆext available channel. Hold down the CHANNEL Æ or button to search through all available channels. CHANNEL PROGRAMMING Memorizing Channels The TV is equipped with a channel memorizing function that allows you to step up or down from the current channel to the next channel set into memory. Before channels can be selected in this way, they must be set into the TVÕs memory. Note: When programming channels, if no buttons are pressed for four seconds, the TV will return to the normal screen. Automatic Memory Tuning 1. Press the MENU button to turn on the pop up menu in the TV mode or CATV mode. Press the MENU button again to select CH MEMORY (channel memory). CH MEMORY ANALOG CLOCK/TIMER 2. Press the MENU button again to select AUTO MEMORY. AUTO MEMORY SEARCH/SKIP MEMORY ADD ¥ERASE TV/CATV 3. Press the + button to start AUTO MEMORY. The TV will begin setting into TV 07 memory all the channels available in your area. When no broadcast signal is detected on a channel, AUTO MEMORY START [+] the channel is erased from memory. When a signal is detected, the channel is stored in memory and the next channel is selected. This process will be repeated until the highest channel is reached. It then stops at the lowest channel stored in memory, and returns to a normal screen after four seconds. The TV will then be in the SKIP mode. TV 07 AUTO MEMORY END NotÆe: Before selecting channels with the CHANNEL Æ or button, the channels must be set into the TVÕs memory. See MEMORIZING CHANNELS at the right. 18