ProForm Sr30 English Manual - Page 4

ASSEMBLY Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included allen wrenches, assembly requires a phillips screwdriver , an adjustable wrench , and a rubber mallet . As you assemble the exercise cycle, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the quantity used in assembly. Note: Some small parts may have been preassembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled. M4 x 16mm Screw (40)-5 M6 x 16mm Screw (37)-5 M6 Flat Washer (38)-1 M10 Split Washer (43)-8 M10 Nylon Locknut (44)-6 M6 x 53mm Screw (30)-1 M10 x 66mm Button Bolt (47)-4 M10 x 52mm Button Bolt (42)-2 M10 x 75mm Carriage Bolt (48)-2 M10 x 80mm Button Bolt (49)-2 4