ProForm Xp 300 Weight Bench Exerciser English Manual - Page 15

ATTACHING ACCESSORIES The Lat Bar (55) can be attached to a Cable (61) with a Cable Clip (71). For some exercises the Chain (24) should be attached between the Cable and the Lat Bar with two Cable Clips. The other accessories can be attached to the Cables (61) in the same manner. ATTACHING THE BARBELL ADAPTER Slide the Barbell Adapter (54) onto the Barbell (51) and secure it in place with an M8 x 10mm Set Screw (62). Repeat this process on the other side of the Barbell. ADDING WEIGHT Slide the desired amount of weight (not included) onto the Weight Carriage (42). Secure the weight with the Spring Clips (72). Add weight to the Barbell (51) or Leg Lever (not shown) in the same manner. Weights can be stored on the Center Rack Base (39) when they are not being used. WARNING: Always place an equal amount of weight on each side of the Weight Carriage (42) or Barbell (51). Do not place more than 150 pounds on the Weight Carriage or Leg Lever (not shown). Do not place more than 310 pounds on the Barbell. 61 71 24 71 55 62 51 54 Weight 42 72 51 39 15