ProForm Zt3 Treadmill English Manual - Page 7
Bolts 8 and two 3/8 Star Washers 9
View all ProForm Zt3 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1. Orient the Base (85) as shown. 1 Identify the Right Upright (78), which has a square hole near the lower end. Orient the Right Upright (78) as shown, and attach it to the Base (85) with two 3/8" x 2 1/4" Bolts (8) and two 3/8" Star Washers (9); do not tighten the Bolts yet. 2. Orient the Left Upright (77) as shown, and attach it to the Base (85) with two 3/8" x 2 1/4" 2 Bolts (8) and two 3/8" Star Washers (9); do not tighten the Bolts yet. 78 85 Square Hole 9 8 9 8 Latch Holes 85 77 9 98 3. Attach a Wheel (84) to each side of the Base (85) with a 3/8" x 2 1/4" Bolt (8), two Wheel Spacers (83), and a 3/8" Nut (13) as shown. Do not overtighten the Bolts; the Wheels should turn freely. 3 84 83 83 13 8 84 83 83 8 13 85 7
7
3.
Attach a Wheel (84) to each side of the Base
(85) with a 3/8" x 2 1/4" Bolt (8), two Wheel
Spacers (83), and a 3/8" Nut (13) as shown.
Do
not overtighten the Bolts; the Wheels should
turn freely.
85
84
13
83
83
8
84
83
83
8
13
2.
Orient the Left Upright (77) as shown, and at-
tach it to the Base (85) with two 3/8" x 2 1/4"
Bolts (8) and two 3/8" Star Washers (9);
do not
tighten the Bolts yet.
85
77
9
9
8
Latch
Holes
2
1.
Orient the Base (85) as shown.
Identify the Right Upright (78), which has a
square hole near the lower end.
Orient the Right Upright (78) as shown, and
attach it to the Base (85) with two 3/8" x 2 1/4"
Bolts (8) and two 3/8" Star Washers (9);
do not
tighten the Bolts yet.
85
Square
Hole
8
8
9
9
78
1
3