ProForm Zt3 Treadmill English Manual - Page 9
Damaged When You Turn On - assembly
View all ProForm Zt3 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. See the left inset drawing. Identify the outer 6 side of the remaining Frame Spacer (79). 77 Hold the Frame Spacer (79) between the Left 13 Upright (77) and the Lift Frame (65), with the outer side of the Frame Spacer facing the 79 Left Upright. Attach the Left Upright to the Lift Frame with a 3/8" x 2 1/2" Bolt (1), a 3/8" Washer (10), and a 3/8" Nut (13); do not 10 tighten the Bolt yet. 1 65 79 77 13 Outer Side 1 10 Inner 79 Side 65 7. Have a second person hold the console assembly near the Right Upright (78). Connect the wire harness on the console assembly to the Upright Wire (74) as shown in the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire (74). 7 Console Assembly Wire Harness 78 74 Wire Tie 74 9