Pyle PD1000BA Instruction Manual - Page 12

2.4 MENU LANG MENU LANG: Sets the preferred menu language as the default when playing DVD. (If DVD support these languages) 4. VIDEO SETUP PAGE 4.1 BRIGHTNESS BRIGHTNESS: Sets the brightness level of video output. 2.5 EXIT SETUP 3.AUDIO SETUP PAGE 4.2 CONTRAST CONTRAST: Sets the contrast level of Video output 3.1 AUDIO OUTPUT AUDIO OUT: Sets the audio outputs. 4.3 HUE HUE: Sets the hue value ofthe Video. 3.2 KEY KEY: Use the Up and Down arrow button to move acroll and adjust the key. 22 www.PyleUSA.com 4.4 SATURATION SATURATION: Sets the video saturation. 6.1 OPMODE OP MODE: This can set the type of output and adjust audio frequency. 5. SPEAKER SETUP 5.1 SPEAKER SETUP PAGE DOWN MIX MODE: sets front speakers to LT/RT STEREO, V SURR • The rst 3 settings (LT/RT, STEREO, V SURR) downmix the sound Signal for 2-Speakers. This setting allows you to enjoy a surround sound effect with only two speakers. For this reason a setup for additional speakers (described in the following sections) is disabled when DOWNMIX MODE is set to these settings. 6.2 DYNAMIC RANGE DYNAMIC RANGE: When LINE OUT is selected, choose this setting to adjust the line out ratio and get di erent effect. If adjusting to FULL, the audio signal peak value will be the minimum; while adjusting to OFF, maximum. 6.3 DUAL MONO DUAL MONO: If your ampli er/decoder has Dolby Digital output, you may select stereo, left mono, right mono, or mixed mono mode for your ampli er decoder. 6. DIGITAL SETUP PAGE www.PyleUSA.com 23